Biomodulo Data
Technical Details
BIOMODULO is a plastic modular and self-supporting element, 27 cm high provided with 4 special height diffusers for the creation of foundations and air spreading and distribution perforated floors. They are made of concrete and heavy means can transit over them.
| Sizes | 50 x 50 x H33 cm | 50 x 50 x H37 cm |
| Nozzles height | 6 cm | 10cm |
| Free span height | 21 cm | 21 cm |
| Free span lenght | 34 cm | 34 cm |
| ø max pipes (1) | 200 mm | 200 mm |
| ø max two pipes (2) | 160 mm | 160 mm |
| Cosumption of Concrete at edge of the nozzles | 0,1 m3/m2 | 0,14 m3/m2 |
| Material | PP | PP |
| Packaging Size (cm) | 103 x 103 x 245 | 103 x 103 x 255 |
| N° pz. per pallet | 300 | 300 |
| m2 per pallet | 75 | 75 |
Heavy loads
Workers can walk on BIOMODULO even before the final concrete casting, thanks to it being realized with a mix of regenerated plastic materials which are atoxic, and highly resistant.
| Overload | 10.000 kg/m2 |
| Top concrete slab thickness | 6 cm |
| Lean concrete thickness | 10 cm |
| Gravel pressure | 5,66 kg/cm2 |
| Gravel thickness | 25 cm |
| Pressure on the ground | 0,49 kg/cm2 |
| ø bars | 6/8 mm |
| Netting mesh | 20 x 20 cm |
Installation
Realization of the foundation
Thanks to the homogeneous and regular air distribution and self-supporting capacity of the finished floor, BIOMODULO facilitates the realization of aerobic stabilization sections and of composting systems for the treatment of domestic and agro-food waste but it also realizes biological deodorizing bio-filters to eliminate the organic smells.
BIOMODULO is walkable even before the finishing cast and it is realized with a mixture of regenerated plastic materials, atoxic and highly resistant which remains unchanged over time.
- Realization of the layer with delivering and place on-site of rolled gravel, 25 cm thick;
- Pour of lean concrete base, 10 cm thick;
- Possible place of a insulating layer made of PEHD (especially required for the composting);
- Place on site of BIOMODULO made of polypropylene;
- Place the STOPEND and GEOBLOCK that allow the closure, avoiding the concrete infiltration in the lower air chamber. Moreover, they allow the partition of the lower air chamber sections;
- Place the GEOBLOCK element which allows the extension of BIOMODULO in correspondence of the inspection channels in order to guarantee a single cast, monolithic and a higher bearing and stabilization capability;
- Place of the allocation reinforcements (welded mesh) that is needed to resist to the operational loads;
- Concrete filling cast, strenght classRck’ = 250 kg/cm2 and consistency class S4, thickness 6 cm poured on-site without the use of pumps;
- Cast vibration and caps removal after the consolidation of the concrete.
